|
SHGL-307 Food Processor Instruction
Manual
Safety Instructions
*Read this
instruction manual carefully before operating this unit.
*Children should not operate this unit.
*Always unplug this unit when not in use and before
cleaning and maintenance.
*Never leave this unit unattended when it is turned
on. Keep this unit out of the reach of children.
*Do not run this appliance if it appears to be faulty in
any way.
*For repairs or accessories, contact your dealer or an
authorized Service Center.
*Do not immerse the base in water when cleaning. Do not
use the control button(s) with wet hands.
*The water temperature should not exceed 60°C (140°F)
during cleaning.
*Do not run this unit for long periods, otherwise the
unit could be damaged.
*When the motor is running, do not put water into the
cup.
*When using chopper and grinder, do not put water into
the cup.
Safety
Protection: The motor is equipped with a protection
setting. If over-loading occurs, it will turn off
automatically and re-operate after cooling.
Instruction
for use of Juicer
*Cut the fruit and
vegetables into pieces small enough to fit through the
guide hole.
*Put the separating
trough on the base and tighten it clockwise. Put the
filter into position on the connector and then put on
the transparent cover and lock the cover, the inner lock
switch will be connected automatically.
*Put the fruit plate
on the transparent cover and put the juice cup under the
juice outlet (make sure the cup is in the correct
position, with the concave surface towards the main
unit).
*Turn the control
button to “1”.
*Put the fruit and
vegetables on the fruit plate and push them into the
guide hole with the fruit/vegetable press. Make sure the
volume is not more than 1/3 of the guide hole.
*Remove the residue
on the separating trough after extracting 2 ½ cups of
fruits and vegetables.
*Note: To
avoid injury, DO NOT put your finger or other things
into the guide hole.
Instructions
for use of Blender
Making
Fruit/Vegetable Sauce
*Cut the food into
cubes and put into the blender cup. Make sure the volume
in not over 2/3 of the blender cup. You may add some
water. Put on the blender cup cover and tighten it
clockwise.
*Turn the control
button to “2” and run the blender continuously for 15-20
seconds.
*The filter may be
used to keep the food particles separate from the
juice. Put the filter into position and put the desired
food inside of the filter. Operate the blender on speed
“2” for 15-20 seconds.
Instructions
for use of Chopper
*Connect the
chopping cup to the base and turn it tight clockwise.
*Put the chopping
blade in the cup and onto the driving connector.
*Cut the food into
small cubes (if chopping meat, then remove any bone or
muscle) and put into the chopping cup. The volume of
food should not be more than 1 1/4 cup). Close the cover
and tighten it clockwise.
*Turn the unit on
and press the pulse button repeatedly.
*When the food has
been cut into desired pieces, turn off the unit. Remove
the cup after the motor has stopped running.
Instructions
for use of Grinder
*Put the food into
the grinding cup, make sure the volume is not more than
¾ cup.
*Set the grinding
blade into the grinding cup and turn it tight. Then
connect them to the base and tighten it clockwise.
*Turn the control
button to “2” and run the unit continuously for 30
seconds.
*After grinding,
when the motor stops running, remove the grinding cup
and pour the food out.
Note:
DO NOT put water into the grinding cup.
Instructions
for use of Slicer
*Connect the slicing
cup to the base and tighten it clockwise.
*Select the correct
slicing blade (the blade has two slicing functions), put
the slicing blade with blade holder in the cup and onto
the driving connector. Then put the cover on and tighten
it clockwise.
*Plug the unit in
and turn the control button to “2”. Put the food into
the cup through the guiding tube and press the food with
the food press. Use a container to collect the sliced
food.
*Important:
To avoid injury, DO NOT put your fingers or other
objects into the guiding tube.
|
Troubleshooting |
|
Trouble |
Possible |
Solution |
| Motor will not
operate. |
Safety lock is
not connected. |
Reassemble the
cup and connect with the base correctly. |
| Motor is
overheating. |
Too much food in
unit, or unit has been operating too long. |
Reduce the food
and run it again after the unit has cooled down. |
| Not able to chop
meat. |
Too much muscle
or too much meat at one time. |
Get rid of the
muscle or reduce the volume. |
| Blender not
working well. |
No water or too
much water. |
Add/remove
suitable water. |
Maintenance
*Avoid any bumping
of the appliance.
*After usage, clean the appliance and
wipe the non dishwasher safe parts with a dry or damp
cloth.
SHGL-307 Food Processor Product Information |
